Cute Easter Bunny Figurine with basket

Cute Easter Bunny with a basket

You can add multiple small eggs or one large egg to the basket, that is printed separately or you can add whatever else you'd like just make sure it fits between the handle and the top of the basket.

You can enlarge it, but it is not recommended to shrink it as the basket handle becomes too thin.

*Caution*
This print a bit complex, you need to follow the below guidelines to make sure the end result is as expected:

- Clean your plate thoroughly or apply glue. The print relies on supports that need to stick well to the plate. If you have bed adhesion issues, you can try adding a brim.
- When removing the completed print, don't just snap it off, use a spatula/scraper to carefully remove the basket first. Since the basket also touches the plate, you need to remove it first, otherwise the basket handle may break. I had a few breaking on me when I snapped them off the plate without removing the basket first. It is also advised to hold the basket with one hand while working around it with the spatula 
- Use needle nose pliers or similar to carefully remove the supports in pieces
- Eggs need brim, it is added to the print profile

Enjoy!