HueForge : French Bulldog

Made a HueForge for my friend who owns a French Bulldog. I hope all dog parents will like it.

HueForge description:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 140x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Blue Gray
    At layer #17 (1.44mm) swap to Gray
    At layer #21 (1.76mm) swap to Jade White for the rest.
 

NOTE: If you are using an AMS, then the above color change instructions are only for information. Just load and map the AMS accordingly and model has color change instructions in built. If you do not have AMS, then manually change the colors by adding pauses after slicing.