Guitar for picks, sd cards and more!
Tim_BrickerMarch 19, 2025
Description
Introducing a decorative guitar that I have tried to make as detailed as possible in such a small size (133.7 x 51.7 x 15 mm). The guitar is not only a decoration on your desk, but also has a secret storage compartment.
You can choose from 3 different cases:
- For picks + 2 micro SD cards;
- For up to 15 micro SD cards + 3 adapters.
- Hollow inside for your own ideas.
The case has an invisible closure on the outside, so it is not obvious that anything can be stored inside.
To get a better result, I had to cut the guitar into 10 pieces, some of which had to be glued together. I recommend using a toothpick to apply the glue so as not to ruin the guitar with glue lines.
Note that the strings are also printed, which gives the guitar a much more interesting look. These are the ones I strongly recommend not to be glued, they hold in the grooves quite well. If you accidentally tear them, you can easily reprint the strings.
For a successful print use Smooth Plate with my profile settings and before you start I strongly recommend washing the plate with Fairy.
I had a lot of fun designing this model and would like to continue making musical instruments in this format. And if you're interested, subscribe so you don't miss out, I'd love to see your results in the comments!
Check out my larger version of the guitar where the strings are actually 0.5mm fishing line. This gives the model a much more natural look:
Boost MeIf you found my model interesting, please like and comment. I would be very grateful for a subscription too. As a beginner in the world of 3d printing, it is very important for me to see your feedback so that I understand that I am moving in the right direction.
Please, consider to Boost me. It's motivates and will also help me to buy an additional A1 mini faster, which will significantly speed up the process of testing the models and print profiles that I creating for you.
Thank you! ❤️
Other Links:
Happy printing!
