Swiss key holder - remix with ring UPGRADED! V3

Upgrade! V3!

This is my 3rd remix of the very good "Swiss key holder" (https://makerworld.com/en/models/22959#profileId-168331) made by Many24 (https://makerworld.com/en/@Many24) 

In the previous version, I added a strong ring on one side for big keys or other accessories. However, when using a metal ring, sometimes the keys' movement gets blocked, especially if the metal ring is large.
To fix this, I moved the printed ring closer to the edge of the body. Now there are plates on the model: the original one and two new plates with the ring positioned on either side.
I personally prefer the "Ring Rotation 60° CW" version because it lets me push the keys easily with my thumb through the side hole. But if you prefer grabbing and pulling the keys instead of pushing them, you might like the "Ring Rotation 60° CCW" version better.

Assembly: I used 2x16mm M3 screws and 2xM3 bolts, which work well for 8 keys (4 per side). Some of my keys have thicker plastic parts, so I added small washers to even out the thickness where needed.

This version is fully compatible with the previous one, so you don’t need to reprint the side without the ring if you don’t want to

Print settings:

• PLA
• Color change at layer 34
• First layer: 0.20mm, others: 0.12mm
• 4 wall loops

Give it a try! You can even print one for each family member in their favorite color!"

You can find the previous version here:
https://makerworld.com/en/models/986180-swiss-key-holder-remix-with-ring#profileId-960903