Lord Hanuman - HueForge II

Another Hindu God HueForge, this time for Lord Hanuman in Grayscale. Perfect for gifting and place in your Pooja.

HueForge Description:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Blue Gray
    At layer #16 (1.36mm) swap to Gray
    At layer #20 (1.68mm) swap to Jade White for the rest.

My Other models :

You can find the Lord Ganesha statue here : https://makerworld.com/en/models/849074#profileId-796660

Another Hueforge for Lord Shiva is here : https://makerworld.com/en/models/913550-hueforge-lord-shiva#profileId-874720

My collection for more Hindu gods can be found here: https://makerworld.com/@Djelkgrove/collections/5049423-hindu-gods

NOTE: If you are using an AMS, then the above color change instructions are only for information. Just load and map the AMS accordingly and model has color change instructions in built. If you do not have AMS, then manually change the colors by adding pauses after slicing.