M12 Battery Holder - Angled Wall Screw Mount

Simple, easy to mount, M12 battery holder. Two orientations provided. The orientation 1 model is the one shown in the pictures. This model minimizes the distance the battery sticks out from the wall, so that's the one I went with. I mounted it using a simple drywall screw to the wood leg on my workbench. Prints easy in PLA or PETG with no supports needed. If you're going to mount this in the back of work vehicle I would use PETG due to how hot vehicles can get in the summer while sitting in the sun, otherwise PLA is fine.

I have a similar design for the M18 batteries if you're interested: https://makerworld.com/en/models/1235210-m18-battery-holder-screw-mount#profileId-1254723