Retro Phone Amplifier

This model requires less than 300g of filament, and gives a nice retro vibe to the room. It amplifies the volume of your smartphone, and you can also install your Bambulab MusicBox kit on the back to amplify this too.

The assembly is very simple. For me, everything worked without glue, but you can of course use glue if it doesn't hold. Everything except the main part can be printed without support, for the main part I recommend “Tree Support, only on Printbed”. 

1. screw the 4 feet to the main part.
2. Place the small speakers in the holes at the front.
3. place the large speaker covers in the large holes, note that there is a left and a right side.
4. now you can attach the honeycomb structure with the frame at the front and also attach the frame at the back.
5. finally, you can screw your Bambulab kit to the small plate and then attach the plate to the back.