REPO Small Semibot

🦾 Posable R.E.P.O Semi-Bot

 

Printed on Bambu Lab P1S using 0.12mm Fine Detail & AMS
(No Prime Tower Required!)

🔧 Assembly & Features

• Filament Inserted in the Back
• Posable Eyes

• • Eyes pop into the head with a gentle press.
  • They can be repositioned easily.
• Hinged Head
  • Mouth opens and closes using a filament hinge.
  • Simply cut a piece of filament, feed it through the hinge hole, and trim the excess.
  • Tip: Cut the filament at a slight angle for easier insertion.
• Ball-Socket Arms
  • Fully posable to strike dynamic poses.
• Screw-in Legs
  • Legs screw into the body until flush for easy Printing & Assembly.

🛠 Tips for Assembly

• Tight Hinge Holes?
  Use the included 1.5mm Allen key that comes with your printer. Push it through the hinge

   holes and wiggle slightly to loosen.

🖨 Print Recommendations

• Supports Required:
  • Grid Supports from Build Plate Only
• Non-AMS Users:
  • The G-code includes a pause on Plate 2 to allow for a manual color swap for the eyes.

🔄 Update - April 15, 2025 (V2 Released)

V1 Can still be found on the print profiles incase anyone prefers that version!

• New Arm Design Added!

  • Easier printing based on community feedback.

  • V2 Arms printed flat for better print success rate.

     

• Supplemental File for spare parts

  Ideal for any poor folk who have lost an arm trying to meet the quota or during printing!

  • Features Original Arm design which is printed Vertically (Yields better Finish)

  • V2 Arm Design is found on plate 2 & is printed Flat.

     

🧠 Inspiration

This model is inspired by @DanishFish's fantastic REPO Robot models.
Check out their work here:
🔗 DanishFish on MakerWorld

🙏 Suggestions & Feedback

This is my first model, I would love to hear your feedback and ideas for improvement.

I truly appreciate all the support and suggestions from everyone! :)

 

Happy Printing! 🖨🤖

Boost MeIf you like what you see, consider giving me a boost! Its free & It helps me out as a creator. Thanks! :)