1/4" 20 UNC DSLR mount screw

NOTE: Do not print in PLA - it is weak material - it can broke. Print it with PET-G, ASA or ABS filament.

I've modeled reinforced DLSR camera screw. It has 0,08mm layer height, 100% infill, phase in thread bottom and added tolerances in threads.

Full compability with all devices with ¼" 20 UNC mount:

• DSLRs
• Cameras
• Webcams
• Sport cameras (Gopro and other)
• Tripods
• Small lasers (with ¼" mount) - there are also laser with 3/8" mount so check it before print