Description
Congratulations, you beat this (very hard) game and saved Hyrule. You are a REAL hero! Now, let's frame that moment :)
Take into account that the background plate, with the sprites, is a 5 color print. There are many methods to accomplish this, but basically, use the same AMS slot for dark red and normal red and pause the print to change the color in the AMS slot once it gets freed. This video might help.
Layer Map - 1 AMS
- Requires 1 AMS with push in place pieces. You can use glue to make the pieces more secure, but is not required based on my testing. It is actually quite a tight fit (but not too tight) so you might need to use some careful pressure to fit the sprites through the hole in the foreground. I even recommend to heat it a little bit to make it easier, but, again, it is not needed based on my testing. The frame is equally a very tight fit, so please make sure that the orientation is correct before pushing it in :)
- Includes a plate for the sprites and another plate for the scenery.
- The frame can be printed from @Fletch16.
- It is a very nice fit overall.
Colors used (9 in total)
- Black - Bambu PLA Matte Black (could also be Basic Black)
- White - Bambu PLA Ivory or White
- Blue - Bambu PLA Matte Marine Blue
- Red - Bambu Matte PLA Scarlet Red
- Dark Red - Bambu Basic PLA Maroon Red
- Green - Bambu Basic PLA Green
- Dark Green - Bambu Matte PLA Dark Green
- Purple - Bambu Basic PLA Purple
- Beige - Bambu Basic PLA Beige
mmora
