Wrenchholder, hidden screws and french cleat

Made this simple, yet strong and effective wrench holder. 
Sliding part for numbers, so it can easily be changed out, or for those using inches, bald eagles etc. 

Probably overkill with 4 screwholes, 2 should be enough, but they are hidden anyways. 
Also made the bottom with a french cleat, so should work with a 1cm or roughly 3/8" setup. 

 

Boost Me

This model is from 19-12mm in size. Reduced the couple last “hooks” after print as the 12 was tight. 

I printed it in 0.24, but can very quickly be printed with much nicer quality in 0.2 or less, and with ironing.