Microsoft Windows Dummy 13

Dummy 13 models bring me tons of joy, having a growing army of them around my workspace. I decided to design a few remixes and am sharing them in case others want to print these versions.

This remix is based on https://makerworld.com/en/models/638587-dummy-13-version-1-0#profileId-564186 and is modeled after the Microsoft Windows logo color pattern, with an inset in the chest for the logo itself, and the limbs colored to match.

If you are new to Dummy 13 please check the original model for detailed information related to Dummy 13, assembly etc.

The frame (and optional stand) is recommended to be printed in PETG for improved strength and durability, with all armor and accessories being PLA.

There are lots of small parts, so if you are using a non-sticky plate, you may consider using glue stick on your plate, i do this for all my prints and the adhesion is almost flawless this way. I do have periodic adhesion issues with the forearm armor since they have thing surface area touching the bed, so be warned :).

There are 2 of each color square included in the plates, 1 each for the chest logo and the stand logo. You can skip printing one of the squares via Bambu Studio or Handy, if you aren't printing the custom stand included with this remix. The squares press fit into the chest and stand's inset squares, glue should be optional (CA glue recommended and works well).

I also included an optional Windows Cursor accessory, as well as alternate abdomen with Windows Hourglass, Helmet with Windows Hourglass face, and Helmet with Windows waiting Circle face.

IMPORTANT: I recommend printing the alternate abdomen and helmets with a 0.2mm nozzle.