Mac Miller - Best Day Ever

Mac Miller - Best Day Ever

Other Mac Miller fanart can be found here: https://makerworld.com/en/@Noahs_A_Noobie/upload

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA Hatchbox Purple Transmission Distance: 2.6
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Ignore if using AMS:

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Purple
    At layer #9 (0.8mm) swap to Red
    At layer #15 (1.28mm) swap to Yellow
    At layer #21 (1.76mm) swap to Jade White for the rest.