CPG Token Case

This is a straight forward case I made to hold games token - specifically in my case X-Wing 

I also wanted to include a window - so using the same 188mm square 2mm thick perspex sheets I use for my display cases I created this token case. 

I experimented with actually adding the window mid print, so no more gluing and clamping :-) 

I have printed using the draft profile on 0.4mm nozzel @ 0.24mm layers so a pause is added at layer 17 (4mm height) where I drop in the perspex and then continue the print to seal it in. I did not apply any adhesive to the Perspex but if doing again I would 

For the container I have included 2 options, just different divides - I have printed the case at scale 99.7% for X and Y as I found 100% too tight (still fit but it was tight)