Big Size Frenchie Doggy (Also A1 mini-No supports)

the model is cut into parts to adapt it to the plane of my A1 mini generating a finished model of a height of 30 centimeters I also made holes with interlocking pins to make sure to center it better during the printing phase (after some tests I can assure you that it sticks easily even avoiding the pins) so you can avoid printing them and save filament the total print is made up of 4 different plates, I made mine with only 6% filling with a gyroid texture. there is no need for supports if you print in this size or greater or if you use my print profile that is already in place to avoid supports. in total I used about 600 grams of filament and about 15 hours of printing. you can scale it as you like even for printers with a larger plate started with an Ai generation taking a photo of my frenchie then worked on blender to smooth it and eliminate defective meshes making it easier during the printing phase I hope you like it

 

 

 

 

 

 

Boost Meif you want to support me just leave a boost ;)