woodworking kanna plane & chamfer kit 30 mm blade

MembershipWant to support my work or sell prints of my designs? As a subscriber, you will:      🛠️Help me create more free, high-quality models.      ✨Unlock exclusive perks.      💼Acquire commercial rights.Boost Meboosts will be appreciated

The plane:

 

Traditional hand plane for woodworking for 30mm blade. Kanna Japanese plane. You can use it as is without any hardware exept for the blade.

 

The Chamfer kit:

Put 2 or 4 m4 heat inserts in the holes of the sole of the plane and use it to install the kit with 2 m4 screws. Put two m5 heat inserts in the part of the kit without buttonholes and two m5 bolts inside the knobs. Find the right lenght for bolts and screws an put all togheter. 

Simple regulation by tightening the knobs in right position for the chamer radius you need to do. To set front and back position in the same spot use the printed lines on the side of buttonholes (1mm distance between every line). See picture to understand.