Plant watering tulip v2

The tulip-shaped plant waterer holds approximately 200 ml of water and slowly releases it into the soil through a small hole at the bottom. It's perfect for keeping larger pots evenly watered while you're away.

This is a redesigned version of my earlier two-part model. Now made in one piece, it prints in place—no assembly or glue required.

Important!

The hole size may vary slightly depending on the filament and printer. Please print the test model first to determine which version you need — with a smaller or larger hole.

If the hole is too small, you can carefully enlarge it using a hot needle. If water drains too quickly, you can slightly reduce the opening by gently warming it with a lighter to soften the plastic.