Boost MeBoosting is free and helps me a lot!MembershipCommercial Licenses Available!
This is a 1-40 scale model of the Minecraft Happy Ghast from the Minecraft update!
- I didn't have enough filament to prototype a 1-20 scale unfortunately, but if you do, please post a print profile!
- Other Scaled Minecraft Models you may be interested in:
Read Before Printing:
- Assembly will be required (glue should be minimal to none)
- Refer to the assembly section below
- This is my first relatively complex multicolour model (I don't like how multicolour prints waste filament)
- This will consume about 337g of filament in total (99g flushed/supports/purged ).
- I've tried to separate as many colours but some small parts that were a hassle to glue together
- Painting the model will drastically reduce print times and waste.
- The print profile I've included is a slightly modified extra draft (0.28mm layer height)
- Total print time should be around 12 hours.
- You may slice it finer, but wastage and print times will increase dramatically (I'm not patient lmao)
Assembly Gifs:
Tentacles
Some force and care required
Blue Cloth:
This part may require some flexing to ensure proper seating
Saddle:
The saddle will only fit in one direction, so flip it if it seems too tight/flexes
Goggle Lens:
Goggles:
Tyron_Makes_Stuff
