Princess Snow White - The HueForge - 7 Colors

Made this for my daughters who are currently in princesses and disney phase.

It turned out to be a easy print with 7 colors. If you have AMS, simply start with Black, Red, Blue and Cyan, and then replace black with white, red with pink and blue to yellow, when you reach to the pause in print (already added in the profile).

Here are the hueforge details:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.7mm and the Actual Depth is 2.6mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA Bambu Labs Cyan Transmission Distance: 8
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Pink Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Red
    At layer #13 (1.12mm) swap to Blue
    At layer #16 (1.36mm) swap to Cyan
    At layer #18 (1.52mm) swap to Yellow
    At layer #23 (1.92mm) swap to Pink
    At layer #25 (2.08mm) swap to Jade White for the rest.

Hope you guys will get a smile on your loved ones faces with this print!