Ifixit Manta labels

Please check your bit layout to my example, because Ifixit has been known to swap out certain bits for others over the years.

Something I discovered while experimenting with printing of this model was that I used a non-bambu white PETG with Bambu blue PETG and the two did not work together, and the white pretty much disappeared. My working example was with Bambu Cream and Blue PETG. Somethign to be aware of if you use non-bambu with bambu filament, they may mix and not stay separated and give clean lines. 

To achieve the print detail of the symbols and text, you will need to use the 0.2mm nozzle. I am offering the main file .3mf with the settings to print with text/symbol details, or the .STL can be printed without any details. If you choose the model without text/labels you can then print the symbols and text from the Ifixit PDF file, cut to size, and glue the paper to the card (possibly - I haven't tested that). Below I have included the link to Ifixit where you can download PDF files for paper printing, if you need. I am also including other variations of print profiles where you can print this with the 0.4mm (text only) and another version with text and symbols (but the symbols won't print 100% and will be fuzzy/blurry, or missing details. 

https://www.ifixit.com/Wiki/Driver_Kit_Bit_Layouts

Please share, like, or boost if you like this model. Thanks!