PLA Glass Effect 100% transparent

This model provides optimized settings for achieving exceptionally transparent PLA prints!

 

It has not been designed or tested for PETG.

 

I had the best results with the engineering plate paitto but the smooth PEI Bambu plate also had very good results  ora oseq plate 
 

 

For maximum clarity, the key factors are slow print speeds, a very small layer height, and consistent layer patterns at 100% infill.

These settings work well for simple objects but may be less effective for complex designs.

 

You can likely reduce visible lines even further by fine-tuning the extrusion rate in the filament profile.

I printed with a clear GIANTARM PLA 

 

Tutorial for use: 

Step 1: Select the material profile you see in the photo, since it has the correct inserted vestments for the glass effect 

 

 

Step 2: When you open the project on bambu studio it already updates you all the correct parameters, if you want to save them do as in the picture below. Select the print profile  see in the picture, it is to be used with a 0.4 mm hotend  

Boost MeIf you like this research and want to support me envelope the project