Iron solo leveling

Boost MeBoost this model if you liked it!

Do not modify the heigt of this model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 141.5x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.1mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA+ Sunlu Sky Blue Transmission Distance: 8.2
    PLA BambuLab Basic Jade White Transmission Distance: 8
This print uses 3 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Sky Blue
    At layer #18 (1.52mm) swap to Jade White for the rest.