Ikea Heat Magnetic Holder

A magnetic holder for an Ikea Heat circulat cork pad. 

This is a great solution that takes advantage of 5 pcs. 8x2mm magnets and keeps the 3 heat pads away from the kitchen table or drawer. 

In the photos you can see it attached to the side of the fridge. 

The holes should allow for the magnets to just stay in but if you see that they don't, you can always use a small drop of super glue in there. 

This was printed vertically for a nice surface finish on the visible areas but you can adapt it. 

There are also holes on the bottom of each compartment in case the pads get wet. 

 

Boost MeIf you liked this file, please take a second to boost it. It helps greatly.
Thank you!