Boost MeI put a lot of time and effort into my models to give you the best 3D printing experience possible. I try to make as many variations as possible so that everyone can find the right one for them and save you time! ;) Thank you very much for all the likes, downloads and BOOSTS! Have a good print!
THE ULTIMATE CHIP SET
Welcome to the deep cavern of chips, where the most extraordinary chips can be found.
21 chips are numbered (0.01-50,000)
Each chip is individually coloured.
There are 2, 3 and 4-colour chips, with several versions of each.
Printing will be of the highest quality if you use a 0.2mm nozzle, but it is also possible and nice to print with a 0.4mm nozzle!
All the variations made have been coloured, all you have to do is choose which chips you want to print from and select your own filament colours.
Then, create as many chips as you want to print at once on that printer bed. BUT ATTENTION! the more chips you put on the printer bed at once, the less time it will take to print 1!
Thank you very much for all the likes, downloads and BOOSTS! Have a good print!
EngineerForge
