Dial Caliper Clock - Clock Kit 011

Hi there!

Here is a model of a dial caliper modified to use the dial as a clock face. This clock is quite large, coming in at roughly 40" (1meter). 

This clock is modeled for the Bambu Lab clock kit 011, but any generic clock kit should work. 

Although this project has 6 total plates, the print time isn't very long for each plate.

The pieces have a small guide to line up the pieces together, but super glue may be needed to ensure they stay together. 

KEY NOTE - The parts are large, ensure your bed is CLEAN and use a brim if needed to prevent warping!

This model took a lot of trial and error, so if you enjoy, a boost would be greatly appreciated. 

Enjoy!