Big Ben with horse statue

Big Ben with horse statue

Boost MeIf you like this model, consider boosting it! Thanks for your support!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 112.54x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

 

Filaments Used:
    PLA Smart3D.PT Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA Smart3D.PT Grey Transmission Distance: 1
    PLA Smart3D.PT White Transmission Distance: 5
This print uses 4 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Blue Gray
    At layer #17 (1.44mm) swap to Grey
    At layer #23 (1.92mm) swap to White for the rest.