Rio Douro and Serra do Pilar in the fog

Rio Douro and Serra do Pilar in the fog

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x149.79mm in size
 

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA Smart3D.PT Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA Smart3D.PT Grey Transmission Distance: 1
    PLA Smart3D.PT White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.