Lord of the rings 1 - hueforge

Hueforge of Lord of the rings by artist Doaly
The photos shows the result in 200*133mm and a nozzle of 0.4

Boost MeThanks for your boost!

You can change the X and Y dimensions but do not change the Z dimensions  
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.  
You can use filaments other than those indicated, but the result will differ.  
You can use any black PLA

 

Hueforge description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 1.68mm

 

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #840010 PLA BambuLab Basic Marron Red  Transmission Distance: 1.3
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Marron Red
    At layer #8 (0.72mm) swap to Yellow
    At layer #9 (0.8mm) swap to Jade White
    At layer #15 (1.28mm) swap to Yellow for the rest.