STURDY Knitting Loom Set (8-piece)

Sturdier Knitting Looms in 4 sizes. The stronger pins will not break easily. I recommend printing with Bambu Labs PETG-HF.

 

I made these looms to be assembled after printing, which strengthens the Pins as they are printed horizontally to the plate. I tried other models that were one-piece prints, and the pins easily broke off.

 

You will need a Rubber Mallet for assembly. The pins are friction fit.

 

 

 

 

For the Knitting Hooks, you will need some 3/32 stainless rods 4 inches long.

 

Boost MeIf you like this model please click Boost!

 

Grind/Sand one end into a point (not too sharp) and bend it with a pliers.

 

 

To prepare the Handles for the Stainless Hook clean out the hole with a 3/32 drill bit for friction fit or a little bigger for gluing in place with epoxy or JB Weld.

 

Good Luck and Enjoy!