• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
Stackable Risers for 1x8 Boards 3D Printer File Image 1
Stackable Risers for 1x8 Boards 3D Printer File Image 2
Stackable Risers for 1x8 Boards 3D Printer File Thumbnail 1
Stackable Risers for 1x8 Boards 3D Printer File Thumbnail 2

Stackable Risers for 1x8 Boards

EllisCustomCrafts avatarEllisCustomCrafts

April 4, 2025

makerworld-icon
DescriptionCommentsTags

Description

Boost MeLike it? Please boost! It's free for you, and helps me earn filament to prototype more great designs for you to enjoy.

---===[ UPDATES ]===---

 

5/7/2025: I added relief pockets into the corners of the board slots to make it a little easier to get your boards in, if the corners of the board aren't perfectly smooth (READ: if you are lazy and didn't sand them after cutting them to length, like me…).

 

4/7/2025: I made the opening for the boards a little larger because it was too tight in some instances - I broke a few because I had to use a mallet to get them on. 

 

---===[ DESCRIPTION ]===---

 

This is a set of interlocking, stackable legs designed to work with one (1) standard USA 1x8 board to create a tiered display. Perfect for vendor markets, home, office, or anywhere you need to maximize space. I personally use them at markets to display items vertically and make the most of my table space. You can stack them as high as needed by printing more “middle” sections. They feature a half-lap dovetail system—add glue to the joints for a strong, permanent bond if desired.

 

Each riser height has its own print profile, which includes a bottom, middle, top, and standalone shelf piece for that specific size. The height measurement is taken from the surface below to the top of the board it supports:

  • Bottom leg: Measured from the surface it's placed on to the top of the board.
  • Middle and top legs: Measured from the top of the board below to the top of the board they’re holding.

This ensures consistent spacing and easy stacking across all tiers.

 

You can also mix and match different board widths using my other compatible models listed below. They all work together, so you can customize your display setup to fit your needs. Be sure to check them out!

  • Stackable Display Shelf Risers for 1" x 4" Boards
  • Stackable Display Shelf Risers for 1" x 8" Boards
  • Stackable Display Shelf Risers for 5mm x 7.75" Boards

Check out my Vendor Market Items collection for more great items that will make your life easier!

License:

Standard Digital File License

Related Models

Stackable Battery Holders preview image

Stackable Battery Holders

adoniram profile image

adoniram

58,102

Gridfinity Storage Box by Pred (now parametric) preview image

Gridfinity Storage Box by Pred (now parametric)

Pred profile image

Pred

16,648

HexaBin preview image

HexaBin

Medawisla Studios profile image

Medawisla Studios

1,914

Stackable Box V4 preview image

Stackable Box V4

Yuan4114 profile image

Yuan4114

36,860

Stackable Bottle Drying Rack (5 variations) preview image

Stackable Bottle Drying Rack (5 variations)

PenguinPrototypes profile image

PenguinPrototypes

10,948

Market Selling Bins (NO SUPPORTS) preview image

Market Selling Bins (NO SUPPORTS)

NES 3D profile image

NES 3D

2,624

Resistor Box [Stackable & Customizable] preview image

Resistor Box [Stackable & Customizable]

STTrife profile image

STTrife

31,798

GEN2 Under Table Starter Kit - 185 preview image

GEN2 Under Table Starter Kit - 185

Jerrari profile image

Jerrari

4,931