Slime Golem - DnD RPG Miniature Dungeons

Boost MeI'm preparing a whole series of various golems, if you like them leave a boost so I know you like them. I also invite you to recommend in the comments which golems to create.

https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support.

 

Slime Golem – Drifting Sentinel of the Abyss

 

From the darkest corners of forgotten dungeons and cursed swamps comes the Slime Golem, an eerie fusion of arcane essence and corrupted alchemy. This otherworldly construct drips with malevolent power, its shifting form ever in motion, as though barely held together by the will of some unseen master.

Perfect for 3D printing, this miniature brings a haunting presence to any RPG campaign—whether as a unique boss monster, a magical guardian, or a terrifying summon in your tabletop battles. With its fluid design and dynamic pose, it also makes for a striking decorative piece, capturing the mysterious and unsettling nature of arcane lifeforms.

Ideal for fans of dark fantasy and dungeon-crawling adventures, the Slime Golem is sure to ooze menace onto any game board or display shelf.

 

If you like my work, I invite you to help in the contest. Every download and like means a lot to me. Thank you very much for your help.

https://makerworld.com/en/models/1300401-slime-benchy-the-ooze-of-the-print-swamp#profileId-1332609

 

Due to delicate elements please remove supports very carefully. Print was done on A1 mini and came out great.

 

Each of my models is printed 2-3 times before the profile is released. So if you have a problem with printing:
1. DRY THE FILAMENT
2. CHANGE THE NOZZLE FOR A NEW ONE.

3. DO NOT DOWNLOAD IF YOU DO NOT HAVE TIME TO CAREFULLY REMOVE THE SUPPORTS

 

Recommendations: In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

 

 

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

•  

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support