An original pen design that quickly transforms from comfortable pocket-sized to full-sized by removing the cap and stowing it on the rear of the pen.
Features
Pocket-sized length of 97mm (3.81")
Full-sized writing length of 146mm (5.75")
Cap firmly snaps closed onto both ends of the pen.
Accepts common ink refills from multiple brands. Just insert and cut to length!
Basic customization with 2 different print profiles:
Single color (no AMS)
Dual color with double ring (AMS required)
Optional cap for use with a key-ring
Boost MeIf you like my work and want to see more, feel free to give me a Boost!
Printing Tips
Always clean your build plate with water and mild soap.
No Supports - All parts are designed to print without supports.
Brim - A brim is required for the body of the pen.
Recommended Material - PLA Basic and PLA Matte filaments
Assembly
Remove the brim from the pen body and carefully deburr.Use an ink refill that is longer than 92.8mm (3.65"). Shorter ink refills will require custom ink caps, such as the S-7S ink refill.Insert the ink refill into the pen. It should be a light to moderate press fit. Do not remove once inserted.Use a utility knife to score the perimeter of the ink refill flush to the rear of the pen body.Snap the ink refill pointing away from your face and over a paper towel.Slide the ink cap over the rear of the ink refill and into the rear of the pen body.Firmly press the ink cap into place.Snap the pen's cap into place and it is ready to use.
Runswithscssors
