桌下抽屉-Under-desk drawer

中文：

这是一款桌下小型抽屉，用于存放笔及其他小工具，内嵌专门用来存放笔的抽屉。由于我的桌子前方有横梁阻隔，因此我设计了一块用于加强抽屉粘贴稳固性的支撑块，如果你的桌子是平整的，可以无需打印该打印件，支撑块的高度是为50mm（仅供参考）。

该模型为参考了视频网站SOLIDWORKS建模教学所设计，由于教学建模尺寸和使用场景与我的实际使用存在出入，因此修改为了符合我使用习惯及场景的模型。我使用的是为拓竹A1mini打印机，该模型适合A1mini打印。

同时也推荐有兴趣的朋友可以看看这个视频，设计修改出更加符合你自己使用习惯及场景的模型。我将该视频链接也同时附在下面。

需使用材料：双面海绵胶带或者强力胶水

推荐：使用PLA、PETG打印。

教学视频网址：https://www.bilibili.com/video/BV1YJ4m1u7CE

English:

This is a compact under-desk drawer designed to store pens and other small accessories, featuring a dedicated pen-holding compartment. Since my desk has a front crossbeam that obstructs mounting, I added a reinforcement support block to improve adhesion stability. If your desk surface is flat, this part is optional. (Note: The support block height is 50mm for reference.)

The model was adapted from a SOLIDWORKS tutorial video, with modifications to better match my personal usage needs and desk setup. It is optimized for the Bambu Lab A1 Mini 3D printer.

Feel free to customize the design further by watching the original tutorial video (linked below).

Required materials:Double-sided foam tape or strong adhesive.

Recommended: PLA or PETG..

Tutorial video:https://www.bilibili.com/video/BV1YJ4m1u7CE