Dragon Quest III - Erdrick's Seal

A custom model I did from scratch, Erdrick's Seal. It's barely used in the game for a small moment, and I mostly worked off of a tiny .jpg image from several years ago. I used mostly Blender to create and sculpt this model, ommitting the inscription per a commission order I did this for- so I may update it with the inscription another time. 

Important: If you do not have a mid-high range PC, please be careful opening the high resolution .stl file, as it may crash your slicer, or slow your PC down to a crawl

I have included a simplified version that has lower resolution (made using Orcaslicer's simplify button) that should easily open on any PC. Also important to note: you may wish to print this at a 40-45 degree angle as printing it flat will give off a lot of layer lines. I personally couldn't perfect the angle and support amount to get a perfect print, but the key is to print it very slowly if using this method. I usually hand paint my prints but in this case I had some Rust-Oleum metallic gold spray paint left over, so I gave it a nice coat for that metallic look. I did a few hand painted layers of red acryllic paint for the jewel and a tiny outline of black to give it some depth, and one coat of mod podge for the jewel to give it a shine and protective coating.

Happy printing! Let me know if you have any ideas for models, I am available to suggestions! Currently I am looking to model originals or update old low poly models to High Resolution or as desired.