Zhuge crossbow, no hardware pull-out version

MembershipBoost Me

名称：诸葛连弩，无五金件抽拉版

Name: Zhuge crossbow, no hardware pull-out version

 

之前有粉丝联系我让我做一把非其他零件只有打印件的诸葛弩箭，前前后后测试了无数把，各种各样的问题，这次算是做出来了。

先上测试视频：

Previously, a fan contacted me and asked me to make a Zhuge crossbow arrow with only printed parts. I tested countless of them and encountered various problems, but this time I have finally made it.

First, go ahead and test the video:

 

拼装：

请看拼装文件，或者我的拼装视频

8.94 复制打开抖音，看看【wannawow摆烂猫的作品】新作品，3d打印诸葛连弩# 3d打印 # 手工di... https://v.douyin.com/MUTObFucl_M/ [email protected] XMw:/ 08/29 

看了的给我点点关注哈哈哈哈

 

注意！图片处连接件较紧（推荐用牙咬进去哈哈哈哈）

Please refer to the assembly file or my assembly video

8.94 Copy and open Tiktok, look at the new work [Wannahow's work of putting rotten cats], 3D print Zhuge Crossbow # 3D print # manual di https://v.douyin.com/MUTObFucl_M/  [email protected] XMw:/ 08/29

Give me a little attention after reading it hahaha

 

be careful! The connector in the picture is tight (recommended to bite it in with your teeth hahaha)

耗材与设计的距离：

前后使用的bambu的pla esun的pla 以及一些其他厂家的耗材进行测试

*具有一定任性的耗材距离会比较远

*matte与哑光不推荐，会断掉。

*一些脆皮的pla也会断掉

*如下图，花圈的地方连接，如果没有断裂，则耗材合格。

Distance between consumables and design:

Conduct tests on Bambu's PLA, ESUN's PLA, and some consumables from other manufacturers before and after use

*Consumables with a certain degree of stubbornness will be relatively far away

*Matte and matte are not recommended as they may break.

*Some crispy PLA may also break

*As shown in the figure below, the wreath is connected. If it is not broken, the consumables are qualified.

 

版本：

这次有两个版本

*1*简易版：最好不要向下射击

edition:

There are two versions this time

*1 * Simplified version: It is best not to shoot downwards

*2*进阶版：推荐

*2 * Advanced Version: Recommended

 

为我助力 (免费)

玩法

1，组装

2，放模拟的弹药（注意位置哈）

1. Assembly

2. Place simulated ammunition (pay attention to the position)

3，使用

这里做了一定的安全设计

3.1，如果你的姿势不正确，则无法成功的拉开。一定程度上保证了安全性，防止因为抖动而造成的轨道偏离。

错误的示例

3. Use

A certain level of security design has been implemented here

3.1 If your posture is incorrect, you will not be able to successfully pull apart. To a certain extent, it ensures safety and prevents track deviation caused by shaking.

Wrong examples

3.2正确的姿势：

后手的抓握

3.2 Correct posture:

Grip of the back hand

前手的抓握

Boost Me