Settlers of Catan: Base Game and Cities & Knights

This contains Settlers of Catan & Settlers of Catan: Cities & Knights.

This is a remix of the 3D Settlers of Catan (catan-style boardgame 2.0 (magnetic & multicolor)) and 3D Settlers of Catan: Cities & Knights by Dakanzla (cities & knights 2.0 (magnetic & multicolor)) made so you can now print Catan and all the expansions to play Cities & Knights with 5-6 people on a Bambu Lab printer! This contains the same filament colors as Ty Robbins' Settlers 3D. I used the same coloring for filament colors as them. I remixed the parts to make it so people can create Cities & Knights all in one project.

Tips for printing & assembly:

• You will need to buy the game cards associated to the Catan Base Game. I bought these CATAN Replacement Game Cards from Amazon.
• You will need to buy the game cards associated to the Cities & Knights Expansion. I bought these CATAN Cities & Knights Replacement Game Cards from Amazon.
• The Cities & Knights Die pictured, which is needed for this game, can be found below. https://makerworld.com/en/models/1341257-catan-cities-knights-die#profileId-1381820
• If you want to add magnets to the bases, I used 2 boxes of these 3x3mm neodymium magnets (I have not tested these magnets, so your mileage may vary) and inserted 2 into each slot, while pressing it in with a cover. This assembly video may help with this process.
• To get the most detail out of the model, turn on variable layer height for some models, especially the Water Landscape & Harbor Water Landscape.
• To waste less filament, turn on purge into infill, and consider purge into object to create unique colors of cities, settlements, ships, tiles, etc.

This contains Settlers of Catan and Settlers of Catan: Cities. If you haven't printed anything yet and want to play Cities & Knights with up to 4 people, print this. For a full table of the Catan editions and expansions, refer to the table below:

Catan Editions Included in this Model

If you want to print out any other permutation of Catan, here are the links:

Settlers of Catan Complete Edition (Settlers of Catan, Settlers of Catan: 5-6 Player Expansion, Seafarers, Seafarers: 5-6 Player Expansion)

Settlers of Catan: Base Game & 5-6 Player Expansion

Settlers of Catan: 5-6 Player Expansion

Settlers of Catan: Seafarers

Settlers of Catan: Seafarers 5-6 Player Expansion

Settlers of Catan: Seafarers & Seafarers 5-6 Player Expansion

Settlers of Catan: Complete Cities & Knights Edition (Settlers of Catan, Settlers of Catan: 5-6 Player Expansion, Cities & Knights, Cities & Knights: 5-6 Expansion)

Settlers of Catan: Base Game + Cities & Knights

Settlers of Catan: Cities & Knights

Settlers of Catan: Cities & Knights 5-6 Player Expansion

Settlers of Catan: Cities & Knights + Cities & Knights 5-6 Player Expansion

Filaments Used in Photos:

Bambulab PLA Matte Desert Tan

Bambulab PLA Matte Lilac

Bambulab PLA Matte White

Bambulab PLA Basic Red

Bambulab PLA Basic Orange

Bambulab PLA Basic Green

Bambulab PLA Basic Bambu Green

Bambulab PLA Basic Gray

Polyterra PLA Savannah Yellow

Monoprice PLA+ Light Blue

Monoprice PLA Hi-Gloss Blue Green

Monoprice PLA Hi-Gloss Gray

Inland PLA+ Purple

Inland PLA+ White

ELEG00 PLA Black

(Monoprice filament may be hard to find. Copies of Gray, White, and Purple exist because I ran out of older colors and now use Bambulab filament)

Disclaimer: Dragon robber not included in .3mf. Here is the link: https://makerworld.com/en/models/59435#profileId-63033

Make sure to print out the Cities & Knights Die! Here is the link to the model:

https://makerworld.com/en/models/1341257-catan-cities-knights-die#profileId-1381820

Looking for a cheap, efficient storage solution to hold all of the tiles and pieces? Check out my 3D Catan Organizer Trays! If you want to save filament, check out the Lite Version - 3D Catan Organizer Trays!

AS ACKNOWLEDGED ON THE SNAPMAKER U1 KICKSTARTER CAMPAIGN!