Sturdy packing tape dispenser with integrated cutter makes using tape a lot easier. No more losing the end of tape!Â
Designed for standard packing tape rolls (typically 48–50mm)
I have printed it in PETG but it should also work with PLA.Â
The main body prints on one plate and the cylinder and cap print on another although it would probably be possible to fit it all on one plate if you prefer.Â
When printed you will have to insert the cylinder and into one hole and then line up and insert the peg into the other hole. It is  tight fit so will require a bit of force.Â
Then get hold of a cheap hack saw blade ( I bought 5 for 1E ) and carefully bend it until you get a clean break. This is easier if you have a vice but can be done with pliers if you don't.The blade needs to be about 49mm long.
Then insert your roll of tape and pop on the cap so that it doesn't fall off.
If anyone has any suggestions for improving it, please let me know in the comments. I hope you find it useful!Â
Boost MeIf you find this useful, please boost me! It allows me to get more filament so I can keep on designing new stuff. Thanks!
Daxjim
