Figet Benchy with mini P1S and spool: print in one

This 6 cm 3D print features three interlocking gears, each topped with a benchy, a mini P1S model, and a spool — all printed in one piece for easy handling. The model requires tree supports (select support critical regions only) during printing. Bambu Studio may display a “Non-manifold edges” warning. I ignored it, and the print came out great—no issues at all (let me know if you know how to get rid of the error)! 

After printing, carefully remove all the support material. Then, gently wiggle the animals left and right until you hear  “clicks.” This is the signal that the gears are detaching from the base. Once freed, spin the gears left and right to get them started. The first few spins may feel a little stiff, but don’t worry — the more you spin, the smoother they will become. The model was printed in white and hand-painted with acrylics!

For the best experience, be sure to watch the demonstration video showing how to set up and loosen the gears properly. 

FYI: The video was made using another print: figet farm, the gear parts are the same.