Ikea Bror display conversion

To build this you need about 60 M5 Screws + nuts or screws of similar size. This model  was build with 4mm acryl sheets.

Materials

Back Plate: 84.4cm x 125cm ( either Acryl or any other material, I used PVC plates )

Side glas: 125cm x 54cm ( or if you have the smaller version of bror 125cm x 39cm )

Doors: 84.4cm x 57cm ( if you want smaller doors you can have to get smaller pieces )

For every door you need:

2x 5mm round aluminium rods of 80mm length

6x Round magnet 10mm diameter and about 2mm thick

If the doors are not straight at the end try to lift the corners with the included corner pieces first and then fine adjust the door corner hight.