Dual Grow Light Mount

I had different type of these EWITTI LED Grow Lights (ASIN= B0DM5LHXB5), the one with the samll mount and the other other one with the telescope pole.

So, I came up to design my own base where the telescope pole fits in (and the flower pots can be used as additional weight) 
and I also wanted to have both grow light on top of that pole.

Now, the lights have a regular ¼" UNC thread (same as most cameras, rigs etc have) so you can use the same screws here, ideally with a 3/8 length, you can find them easily on AMZN, search for UNC 1/4"-20  x 3/8" (i.e. here or a package with different sizes)

The telescope pole has seems to have 0.390"-27 UNS thread andI couldn't find a nut or a brass thread insert (in Europe) so I modeled the thread directly into the holder.

It might be a bit tight the first time when you try to screw the pole into it, be sure that the pole is vertical to the holder.

The Base was printed in PLA Marble to match the flower pots and for the holder I used PETG for stability

As always, make sure your filament is properly dried and calibrated before you comment on the print profile.

Happy printing (and growing)