January 9, 2024
Description
185,2 x 12,25 x 29,4 mm (100% scale)
Print in place articulated Moray eel. The body is divided into 12 movable articulated segments, which grant the model with lifelike movement, and a high range of flexibility. The articulation works right off the buildplate, and no further assembly is required.
I have included one raw .stl file, and two .3mf files (print profiles) for Bambu Studio. The first one is single-color for machines without an AMS, and the second one is a multi-color print profile for AMS-equipped machines.
PLA
≤0,2 mm
or
>0,2 mm + variable layer height
>10%
None. The model was designed not to require any support material.
This design is using an older generation of linkage system, so if down-scaled significantly, you may experience issues such as fused or fragile parts. Down-scaling is not recommended, because reliability and full functionality of the resulting print cannot be guaranteed.
Default, laid flat on the belly
Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using some adhesive spray, or other kind of adhesion booster. Using brim is possible, but not recommended, as it would be difficult, and inconvenient to remove afterwards.
All resolved past issues with the model files and detailed information about their fixes will be listed in this section. If you're having any problems which aren't on this list, please visit the Known issues section below. If you don't see your problem mentioned there as well, please leave us a message with more details, so that we're able to address it as soon as possible.
12/22/2024
There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.
My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please visit my Patreon for more licensing options.
License:
BY-NC-ND
Jopek Design
