Extra Wide Vacuum Nozzle (35mm Shop Vac Nozzle)

I needed extra wide vacuum nozzles for extra narrow spaces. Ended up with a bunch of variants, so you can use them as well. You can print them with PLA, PETG, PCTG or TPU 98A. If you want to use TPU for the 100x4 variant, use only the 7ribs version. Bambu Studio generic filament profiles work without any issue, just make sure Support is enabled (as it is in all of my print profiles).

100x4 mm is approx. 4 inch x 5/32 inch

100x6 mm is approx. 4 inch x 15/64 inch

40x10 mm is approx. 1.6 inch x 25/64 inch

35mm is according to internet compatible with most of brands, like: AEG, AMICA, ALASKA, AQUA VAC, BAVARIA, BOSCH, KARCHER, CLEANFIX, CONCEPT, ETA, DIRT DEVIL, DAEWOO, DOMO, EIBENSTOCK, EINHELL, ETA, PARKSIDE, FLEX, GORENJE GALLET, HILTI, HYUNDAI, KÄRCHER, LG ELECTRONICS, MAKITA, METABO, MILWAUKEE,  PARKSIDE, METABO, PHILIPS, SAMSUNG, SENCOR, STARMIX, STIHL, SCHEPPACH, STORCH, TESCO, ZANUSSI and others.

UPDATE: Thank you all for your interest in these nozzles. If you need a different dimension or different brand compatibility just write me a chat message or comment below with suggested alterations.

UPDATE2: Here you can find even more vacuum nozzles designed by me: https://makerworld.com/en/models/1323767