Compact Mini Angled Silicone Nozzle Brush

This is a compact mini nozzle-cleaning brush using the A1 nozzle silicone wiper pads. The handle is based on my no-hardware scraper handle for plastic razor blades which can be found here: 
https://makerworld.com/en/models/783156-no-hardware-bambu-lab-scraper-for-plastic-blades

 

Here is the product page for the pads:

https://us.store.bambulab.com/products/heatbed-nozzle-wiper-a1

 

1. Wider, dual-sided hex grip texture for added grip.
2. Narrower head and bezel to minimize nozzle contact with printed handle.
3. Oblong loop for compatibility with various hook geometries and lengths.
4. Steeper ergonomic angle for easier reach and visibility of the nozzle tip while cleaning.
5. Smaller, nimble form-factor for when you just need a few quick wipes.
    

1. Print the handle in a heat-resistant filament, PETG at the very least.
2. Carefully cut a row of the A1 Mini wiper pads in half (7 segments) with sharp blade.
3. Optional: Use a small bead of cyanoacrylate glue around the perimeter of the pad for a permanent, secure attachment.

Any feedback and/or comments appreciated, thank you!

 

Boost MeIf you find any value in my work, feel free to give it a like, boost or a follow – your support means the world!