Pop-O-Matic / Dice Bubble Roller

Game Night Casino Dice Roller

I have created a self contained Dice Roller. Never have your dice fly off the table again!

This super easy to assemble Dice Tumbler / Tower will go together in minutes after printing.

Just slide the two “flippers” into each side of the “base”, place the “plate” and your choice of dice on top, then screw on the cage to hold them in place while you “roll” your dice!

This example video/GIF is using 2 x 18.5mm dice. I have tried 5 x 18.5mm dice to play Yahtzee and while they do fit and roll around, I would strongly recommend using the smaller (standard?) 15.5mm sized dice instead! The smaller size would also be better for 6 using dice if you are going to play Farkle!

You should probably be able to go down to a 12mm sized dice and still have them contained inside of the cage!

My test version was printed in PLA on a single plate with NO supports needed!