Hueforge Pizza Zone

Hueforge Pizza Zone

Boost MeBoost me please :p:d

Project: PIZZA ZONE.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 245x163.74mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

 

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA Sunlu + Green Transmission Distance: 3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 5.5
    PLA Sunlu White Transmission Distance: 7

This print uses 5 unique filaments

 

Swap Instructions:
    Start with Charcoal
    At layer #10 (0.88mm) swap to Green
    At layer #15 (1.28mm) swap to Red
    At layer #21 (1.76mm) swap to Yellow
    At layer #23 (1.92mm) swap to White for the rest.

 

Please leave a comment and like if you like my Hueforge. Thank you very much.

Non-commercial !!!