Ryobi Blower Speed Tip

Replacement Ryobi Blower Speed Tip. 

Please note there are 3 print profiles. 

The first is the hard “Holder Ring” that clips onto the blower and connects the original soft rubber tapered speed tip. 

The second is the actual TPU soft tapered speed tip. You can use this with the original holder ring that came with the blower or you can print the holder ring. Printing this in a rigid material like PLA, PETG, or ASA will not work as you need to stretch the holes over the pegs on the inside of the holder ring. 

The third, is a custom 1 piece tip that combined the 2 pieces. This will need printed in a hard filament like PLA Tough+, PETG, ASA, etc. so the clip can hold on to the blower. You could use Basic PLA, but it is not recommended for longevity. There are 2 plates. The horizontal orientation will create a stronger clip, but it takes more time and uses more material. The vertical orientation is faster but the clip will be weaker.

Ideal for Clearing Stubborn Debris
Increases Air Speed
Compatible with RY404100, RY404140, and RY404130