Gravity-Sealed Anti-Odor Floor Drain/ 重力密封的防臭地漏套件

This kit contains: 

    floor drain housing; drain cover; drain strainer; anti-odor drain core;

This kit features an installation depth of 50mm with conponents specifications: 

    floor drain housing dimensions 100*100mm; 

    cover diameter 78mm;

    strainer diameter 64.5mm;

    anti-odor core upper-end diameter 48mm/lower-end diameter 33mm;

Drain cover, strainer, anti-odor core are recommonded to be print with 100% infill to enhance density.

PETG is recommended for printing to enhance durability.

About anti-odor core

    The anti-odor core requires counterweight installation. Counterweight must exceed 2g.

    The shaft uses filament. Please ensure the straightness of the filament, otherwise it will not work properly. 

    The provided file includes a counterweight cap. If the counterweight is scrap material, please cut this file to the appropriate length in the z-axis for use.

本套件包括：

    地漏外壳、地漏盖、地漏滤网、地漏防臭芯

本套件的安装深度为50mm，部件参数如下：

    地漏外壳尺寸为100*100mm；

    盖板直径为78mm；

    滤网直径为64.5mm；

    地漏芯上端直径为48mm，下端直径为33mm；

地漏盖、地漏滤网、防臭芯建议使用100%填充打印以增加密度。

推荐使用PETG打印以增加耐用性。

关于防臭芯：

    防臭芯需要配重，推荐配重不小于2g；

    转轴为耗材丝，请保证耗材丝的直线度，否则将不能正常工作；

    在提供的文件里包含配重的盖子。如果使用了碎屑材料配重，请将该模型在z轴切割至合适大小使用.