My Succubus Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.5x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
   PLA PolyLite Black Transmission Distance: 0.3
   PLA BambuLab Basic Gray Transmission Distance: 3
   PLA PolyLite Grey Transmission Distance: 1
   PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
 Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.

✨ Print Profile is ready to use with ams and there is no need for supports 

Here you can find the frame shown in the photo below.