Sailing Upstream

This is the my take for 3D benchy boat remix, that is going up against the stream in a rock terrian. I printed this with a PLA Glow green for boat and the PLA Glow blue for water stream lines. Therefore, they can keep glowing after turning off the light. To achieve this effect, four PLA color including two PLA glow are required. The regular blue is for the river base and PLA Glow blue is for streamlines. Therefore, they can match in day light and only streams shine in dark. If you do not have PLA Glow, you can print the river base and stream with the same blue filament.

Along with the glowing version, I also provided a one color version, which follows the tradition of a benchy boat: no support and print in place. My version would be more extreme for testing your machine capability — long bridges, overhangs etc. You probably also need a good grip for your board. (It printed fine on my textured PEI plate). Hope you enjoy my model!

The original 3D benchy boat is from the following:

https://makerworld.com/en/models/1272656-original-3dbenchy-public-domain-cad-step-file