Opossum Bookmark

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 133.33x200mm in size
 

You may print at higher layer heights below the Base Thickness of 0.48mm
 

The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm

Filaments Used:
    #0e0e10 PLA+ Numakers Pitch Black  Transmission Distance: 1.6
    #8c969d PLA+ Numakers Light Gray  Transmission Distance: 3.2
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #f1ece1 PLA+ Numakers Pure White  Transmission Distance: 4.8
 

This print uses 4 unique filaments

Swap Instructions:
    Start with Pitch Black
    At layer #14 (0.68mm) swap to Light Gray
    At layer #20 (0.92mm) swap to Mandarin Orange
    At layer #23 (1.04mm) swap to Light Gray
    At layer #34 (1.48mm) swap to Pure White for the rest.